stickey4 v2

It will be a self-made keyboard kit stickey4 v2.

* This product is an assembly-type kit that requires soldering.
Build guidePlease read carefully and understand the necessary tools and processes before purchasing.

If you are worried about soldering"Assembly service"Please consider using. (Details below)

What I wanted to achieve with stickey

I wanted a keyboard that was big enough to hold in my hand and use.
The number of keys is small and compact, and the purpose is to make it easy to perform specific actions such as page turning of comics and control of videos.
Nowadays, controlling video conferences is also useful.

BLE Micro ProBy using the wireless connection with, you can use it more easily without worrying about the cable routing. Since it can be connected to a smartphone, you can operate it while sleeping while fixing it with a smartphone holder.

You can also use a rotary encoder by changing the plate. Please customize it according to your needs.

feature

-A 4-key macro pad.
-A rotary encoder can be added with the expansion plate.
・Choc switchIt will be dedicated.
-It is compact because it has a narrow pitch (17x18mm) and the key switch spacing is narrower than the general key switch spacing of 19x19mm.
-Since there is a battery space for BLE Micro Pro, wireless communication can be realized by preparing a BLE Micro Pro and a battery set.

Changes in v2

-Supports Pro Micro Type-C
・ The included Pro Micro is also Type-C.
・ Due to the above measures, the outer shape has become slightly larger.
・ Battery size for BLE Micro Pro has increased
-Changed the slide switch for BLE Micro Pro

How to assemble

-Since no diode is used, there are very few soldering points and it is easy.
-Key switch sockets are not supported (solder directly to the key switch)

For more informationBuild guidePlease confirm.

firmware

set content

-ProMicro Type-C: 1 (farm written)
・ Conthru: 2

・ Screw (7mm): 6
・ Screw (5mm): 6
・ Tact switch: 1
・ Spacer (6mm): 6 pieces
・ Cushion rubber: 4 pieces

・ Key switch plate: 1 sheet
・ Board: 1 sheet
・ Middle plate: 1 sheet
・ Bottom plate: 1 sheet

Other things you need

・USB cable(Type-C compatible): 1
・Choc switch: 4
・Choc keycap(1U): 4
 
 [option]

・Various expansion plates
・Rotary encoder (Lowepro)
　(Others can be used as long as they are compatible with Alps EC11 and EC12. Push switches are not supported.)
・Knob for rotary encoder
・BMP battery set

Private case

I also made a special case, so please have a look.

Case for stickey4 v2

Assembly service

It is an assembly service for those who are worried about soldering.
At the same time as this productAssembly servicePlease purchase.

Precautions

The photo is a sample created and is not the same as the product content.
Specifications are subject to change without notice.

If you have any questions about defective parts, missing parts, etc.Inquiry formPlease contact us from.