This is a case dedicated to stickey4.
Bundled items
·Case・Rubber feet: 4 pieces
build guide
1. Remove the 6 screws on the bottom side
2. Do not use the middle plate and bottom plate
3. Insert the board into the case (if the BMP has a slide switch, it will hit, so insert it from the switch side)
4. Attach your preferred plate
5. Fasten the screw
6. Please attach the rubber feet as you like
7. Done!
Notes
The photo is a sample image and may not represent the actual product.
Specifications may be changed without prior notice.
If you have any questions about defective or missing parts, please contact us using the inquiry form .