stickey4 v1 (discontinued)

The self-made keyboard kit stickey4 v1 has been discontinued.
Please refer to stickey4 v2 .

※This product is an assembly kit that requires soldering.
Please read the build guide carefully and understand the necessary tools and procedures before purchasing.

If you are concerned about soldering, please consider using "Assembly Service". (Details below)

What I wanted to achieve with stickey

I wanted a keyboard that I could hold and use, so I made one.
You can easily flip through manga pages and control videos.
Recently, functions like controlling video conferences are also useful.

By using a wireless connection with BMP, you can use it more easily without worrying about cable management. It can also be connected to a smartphone, so you can use it while sleeping while securing it with a smartphone stand.

You can also use a rotary encoder by changing the plate . Try customizing it for your needs.

Features

It is a 4-key macro pad.
You can add a rotary encoder using the expansion board.
Exclusive for Kailh low profile switch (Choc).
- Narrow pitch (17x18mm) is narrower than the 19x19mm spacing of a typical key switch, making it compact.
- There is battery space for BMP, so you can make it wireless by preparing a BMP and a BMP battery set.

How to assemble

Since diodes are not used, there are relatively few soldering points.
・Key switch sockets are not supported (solder directly to the key switch)

Please check the build guide for details.

firmware

・Supports Remap , QMK, and VIA

set content

・ProMicro: 1 piece
・Consultation: 2 sessions
・Screw (7mm): 6 pieces
・Screw (4mm): 6 pieces
・Tactile switch: 1 piece
・Spacer (6mm): 6 pieces
・Cushion rubber: 4 pieces
・Key switch plate: 1 piece
・Substrate: 1 piece
・Middle plate: 1 piece
・Bottom plate: 1 sheet

Other necessary items

・USB cable : 1 piece
・Choc switch : 4 pieces
・Choc keycap 1U : 4 pieces
 
 [オプション]

・Various expansion plates
・Rotary encoder (low pro)
　(Other devices can be used as long as they are compatible with Alps EC11 and EC12. Push switches are not supported.)
・Knob for rotary encoder
・BMP battery set

Notes

The photo is a sample image and may not represent the actual product.
Specifications may be changed without prior notice.

If you have any questions, such as missing or missing parts, please contact us using the inquiry form .